Zenoah G260PU Manuel de service télécharger pdf (Page 3)

Gauge Rotor

Fig.2

Fig.3

Fig.4

2. Engine Assembling

The carburetor, muffler, air-funnel and sensor are not assembled at factory.

Make sure that the assembling for such parts are done according to the 2.1 and 2.2.

Tightening torques: see page 9

1. Bolt (01252-30550)

2. Muffler (T2075-15110)

3. Gasket (1140-13141)

4. Screw (0263-30408)

5. Engine

6. Gasket (T2075-13150)

7. Carburetor (T2075-81000)

8. Lever, choke (T2070-82410)

9. Air-funnel (848ES08300)

10. Spacer (1142-83110)

11. Screw (0263-30555)

Make sure that gasket and carburetor are mounted as the picture.

If carburetor is mounted upside down position, the engine does not start as

carburetor does not work correctly.

CAUTION

Fig.1

Fig.2: Affix the gauge to magneto.

Fig.3: Turn the crankshaft until gauge

position at top.

Fig.4: Fix the sensor on the mount while

pushing the sensor.

• Take away the gauge from the rotor.

Carburetor muffler and air-funnel assembling

2.1

Sensor assembling

2.2

1 2 3 4 5 6 7 8 ... 14 15

Pas de commentaire

Zenoah G260PU Manuel de service Page 3